Tacoma Chimney Pros logo

Sumner, Pierce County

Masonry Repair (Crown / Repointing) in Sumner, WA

Masonry repair on a Sumner chimney starts at $425. That covers a crown patch or repointing a small section of joints; a full crown rebuild or repointing the whole stack costs more, and the quote says exactly which joints and how many square feet. We match the mortar to the age of the brick, because a hard modern mix on soft old brick can make the brick fail instead of the joint.

Typical investment

From $425

  • Serving Sumner and the rest of our Pierce County territory
  • $99 plus tax on-site inspection, credited toward an approved quote
  • Usually on the same route as Bonney Lake, Fircrest, Gig Harbor
  • Local crews
  • Licensed & insured
  • Documented work
  • Written quote first

Book an inspection

Book your $99 inspection

$99 plus tax, deducted when you approve the repair

Service
Town

Book your $99 inspection

Pick a real open slot on our crew's calendar — takes about a minute.

  • No payment to book
  • Written on-site quote
  • Photos of every job
  1. 1
  2. 2
  3. 3
  4. 4

Masonry Repair (Crown / Repointing) in Sumner

Pick a date
October 2026
Su
Mo
Tu
We
Th
Fr
Sa
Open times

Loading open times…

Not sure where to start

What's going on with your chimney?

Pick what you're seeing at your Sumner home — we'll point you to the right fix.

What we do

Other chimney services in Sumner

The same crew, the same written quote — for Sumner homes.

Ranges shown for orientation — the exact figure is written up on-site, after the inspection.

Why Sumner homes need masonry repair (crown / repointing)

Sumner's pre-war share is unusually high for this part of the county: about one home in eight was built in 1939 or earlier. Chimneys from that era were laid with softer, lime-rich mortar and often topped with a thin mortar wash instead of a proper crown. After eighty or a hundred winters, the wash has usually cracked and the upper joints have worn back. Newer brick chimneys from the seventies and eighties have their own weak spot: crowns poured too thin, with no drip edge.

Your masonry repair (crown / repointing) in Sumner: what's included

Every masonry repair (crown / repointing) we do in Sumner includes:

  • Close check of the crown, the brick faces and every mortar joint
  • Grinding out worn mortar to a consistent depth
  • Repointing with a mortar matched in strength to the brick
  • Crown repair, or a new crown formed with an overhang and drip edge
  • Replacement of cracked or spalled bricks where needed
  • Photos of each repaired area and cleanup of all debris

Signs you need masonry repair (crown / repointing) in Sumner

  • Cracks running across the crown at the top of the chimney
  • Mortar that is recessed, sandy or missing between bricks
  • Brick faces that have flaked off, leaving rough patches
  • Pieces of mortar or brick in the gutter or on the roof
  • A chimney that leans or has an open crack running down its side

Smoke coming back into the room, or a smell that won't go? Book the inspection first.

Book now

Why Sumner homes need it

The top of a chimney takes the worst of Sumner's weather. Rain soaks the crown and the upper courses, and a frosty night freezes that water in place. The first sign is often a small crack in the crown; left alone, water gets under it and the upper bricks start to loosen. Repairs done at that stage are far smaller than rebuilding the top of the stack later.

Why Sumner crowns crack sooner than the bay's

The WRCC record for the Puyallup 2 W station shows about 69 freezing days per year, compared with less than half that at the Tacoma #1 station near the water. Sumner sits on the same valley floor, a few miles east.

WeatherSpark's model for Sumner puts nearly all of that cold inside the wet months, which run from about October 10 to May 8. A crown already holding water after a week of rain is exactly where each freeze opens a crack a little wider.

Your masonry repair (crown / repointing) in Sumner, step by step

  1. 1

    Survey the stack

    We inspect the chimney from the roof and map which joints, bricks and crown areas need work.

  2. 2

    Quote by area

    Your written quote lists the crown work and the repointing separately, with photos of each area.

  3. 3

    Cut and repoint

    Worn mortar is ground out and replaced in layers, and damaged bricks are swapped out.

  4. 4

    Rebuild the top

    The crown is patched or re-formed to shed water away from the brick, then we photograph the finished chimney.

Masonry Repair (Crown / Repointing) prices in Sumner

What this work is quoted at for Sumner homes — the exact figure comes from the $99 on-site inspection, credited toward the work.

Masonry Repair (Crown / Repointing) prices in Sumner — published rates, 2026
ServicePrice in SumnerWhat that covers
Masonry Repair (Crown / Repointing)From $425Crown work, repointing and tuckpointing by surface area
Chimney Sweep$189–$449Full flue swept, Level 1 inspection included
Chimney Inspection$99 plus taxLevel 1 visual; Level 2 adds a full camera scan
Chimney ReliningFrom $1,900Full-length stainless liner, sized to the appliance
Chimney RepairFrom $375Masonry repair — brick and mortar, scoped after diagnosis

Ranges are what these jobs are quoted at in Sumner. The exact figure is set on site after a $99 inspection (credited toward the job if you go ahead), and you approve it before any work starts.

Around Sumner

Sumner is a valley town incorporated in 1891 that calls itself the Rhubarb Pie Capital of the World, on the Puyallup River valley, with a historic core — about 12.5% of homes built in 1939 or earlier — beside newer subdivisions.

SumnerPierce County, WA · 47.203, -122.240

Before and after

What the work changes

Illustrations of what each repair changes on a typical chimney — not photos of a specific job.

The local chimney sweep crew serving Tacoma, WA

From booking to done

Four steps, each one on paper — so you always know what happens next.

  1. 1

    Book online

    Choose a genuine opening on the crew's calendar. Confirmation is immediate.

  2. 2

    On-site inspection

    Liner, crown, cap, flashing and masonry examined in order — each finding photographed.

  3. 3

    Written quote

    One document, plain numbers, covering only the work your chimney genuinely needs.

  4. 4

    Work done & documented

    The repair is completed, then handed over with before-and-after photos of every item.

Masonry Repair (Crown / Repointing) in Sumner — common questions

What does masonry work on a Sumner chimney cost?

From $425. A small crown or joint repair is close to that; a full crown rebuild or repointing the whole stack is higher, and the quote shows the scope in detail.

Repointing or tuckpointing: which one does my chimney need?

Repointing means cutting out tired mortar and packing in new. Tuckpointing goes a step further, with a thin colored bead laid over the joint purely for looks. On most chimneys, repointing is what the brick needs.

Did the 2001 earthquake damage chimneys here?

Across the region, yes. A USGS report on the 2001 Nisqually quake says one in three of the 30,000 homes FEMA inspected had chimney damage. A chimney with loose upper courses is worth checking even decades later.

Get in touch

Book an inspection

Need your chimney checked in Sumner?

A $99 on-site inspection, a written quote before any work, and photos of every item we touch.

Call (253) 313-7601Book