Sumner, Pierce County
In Sumner, servicing a gas fireplace runs $189 to $475. An annual visit to a healthy, easy-to-reach unit comes in near the bottom; a unit with a sooty burner, a weak pilot or glass that has clouded over takes longer and costs more. If a part has failed, we tell you which one and what it costs before we replace anything.
Typical investment
$189–$475
Book an inspection
Book your $99 inspection
$99 plus tax, deducted when you approve the repair
Not sure where to start
Pick what you're seeing at your Sumner home — we'll point you to the right fix.
What we do
The same crew, the same written quote — for Sumner homes.
Level 1 or Level 2 as needed; Level 2 includes a camera run through the entire flue
Learn more
Top-to-bottom brushing of flue and firebox under drop cloths, with a HEPA vacuum pulling the dust
Learn more
Loose or damaged brick, open joints and firebox panels repaired
Learn more
A full-length stainless-steel or cast liner, firebox to chimney top
Learn more
A stainless cap sized to your actual flue dimensions
Learn more
Crown patched, or recast entirely if it can't be saved
Learn moreRanges shown for orientation — the exact figure is written up on-site, after the inspection.
A lot of Sumner's homes date from the late eighties and the nineties, which is when gas fireplaces with sealed glass fronts became the norm in new houses. Many of those units are now twenty-five to thirty-five years old. Older brick fireplaces in town have also been converted to gas logs over the years. The two need different checks: a sealed direct-vent unit depends on its vent pipe and gaskets, while a log set burning inside a brick firebox needs an open, clean flue and a damper clamp.
The two stages the Puget Sound Clean Air Agency uses both target solid fuel. A first-stage ban puts wood hearths and older uncertified stoves off limits; a second-stage ban adds certified wood stoves and pellet units. Neither list in Washington's curtailment regulation (WAC 173-433-150) names a gas appliance.
That is one reason many Sumner owners have switched a masonry fireplace to gas logs. It only works as intended if the unit is running cleanly, which is what a yearly service is for.
Every gas fireplace service we do in Sumner includes:
Smoke coming back into the room, or a smell that won't go? Book the inspection first.
Book nowGas fireplaces that sit unused all summer often struggle on the first cold evening. Spiders and dust settle in the pilot assembly, the thermocouple weakens, and the fireplace will not stay lit. In a damp climate, the vent termination on the outside wall or roof can also collect debris or corrosion. A service before the heating season catches these problems while there is still time to order parts.
We confirm the unit type, turn off the gas and look at the pilot, burner and controls.
The glass comes off, the logs are set aside and the burner and pilot area are cleaned.
We check connections for leaks, test the ignition and look at the vent from inside and outside.
The logs are reset, the flame is checked and you get a note of anything that needs a part or further work.
What this work is quoted at for Sumner homes — the exact figure comes from the $99 on-site inspection, credited toward the work.
| Service | Price in Sumner | What that covers |
|---|---|---|
| Gas Fireplace Service | $189–$475 | Annual service and tune-up; repairs quoted after diagnosis |
| Chimney Sweep | $189–$449 | Full flue swept, Level 1 inspection included |
| Chimney Inspection | $99 plus tax | Level 1 visual; Level 2 adds a full camera scan |
| Chimney Relining | From $1,900 | Full-length stainless liner, sized to the appliance |
| Chimney Repair | From $375 | Masonry repair — brick and mortar, scoped after diagnosis |
Ranges are what these jobs are quoted at in Sumner. The exact figure is set on site after a $99 inspection (credited toward the job if you go ahead), and you approve it before any work starts.
Sumner is a valley town incorporated in 1891 that calls itself the Rhubarb Pie Capital of the World, on the Puyallup River valley, with a historic core — about 12.5% of homes built in 1939 or earlier — beside newer subdivisions.
SumnerPierce County, WA · 47.203, -122.240
Before and after
Illustrations of what each repair changes on a typical chimney — not photos of a specific job.
Before
After
Before
After
Before
After
Four steps, each one on paper — so you always know what happens next.
Choose a genuine opening on the crew's calendar. Confirmation is immediate.
Liner, crown, cap, flashing and masonry examined in order — each finding photographed.
One document, plain numbers, covering only the work your chimney genuinely needs.
The repair is completed, then handed over with before-and-after photos of every item.
Anywhere from $189 to $475. Clean, well-behaved units cost least; one that is sooted up or keeps shutting off takes longer and lands higher. Parts are quoted separately, before we install anything.
Yes. Its venting has to be clear and sealed, and a log set in a brick fireplace vents through the chimney itself. National guidance calls for a yearly check of every chimney and vent, gas included.
Burning gas leaves mineral deposits on the glass, and it builds up faster when the flame runs dirty. Cleaning it during the service keeps the view clear and shows whether the flame needs adjusting.
A $99 on-site inspection, a written quote before any work, and photos of every item we touch.
