Tacoma Chimney Pros logo

Sumner, Pierce County

Chimney Repair in Sumner, WA

Chimney repair in Sumner starts at $375. The word covers a lot: a damper that no longer seals, cracked firebox panels, loose bricks at the top, or a leak that has been ignored for a winter. Because the range is wide, we never price a repair from a phone call. We look at the chimney, show you photos of the problem and give you the price in writing before anything is done.

Typical investment

From $375

  • Serving Sumner and the rest of our Pierce County territory
  • $99 plus tax on-site inspection, credited toward an approved quote
  • Usually on the same route as Bonney Lake, Fircrest, Gig Harbor
  • Local crews
  • Licensed & insured
  • Documented work
  • Written quote first

Book an inspection

Book your $99 inspection

$99 plus tax, deducted when you approve the repair

Service
Town

Book your $99 inspection

Pick a real open slot on our crew's calendar — takes about a minute.

  • No payment to book
  • Written on-site quote
  • Photos of every job
  1. 1
  2. 2
  3. 3
  4. 4

Chimney Repair in Sumner

Pick a date
October 2026
Su
Mo
Tu
We
Th
Fr
Sa
Open times

Loading open times…

Not sure where to start

What's going on with your chimney?

Pick what you're seeing at your Sumner home — we'll point you to the right fix.

What we do

Other chimney services in Sumner

The same crew, the same written quote — for Sumner homes.

Ranges shown for orientation — the exact figure is written up on-site, after the inspection.

Why Sumner homes need chimney repair

The repairs we see in Sumner often follow the age of the house. On the older homes, with their tall brick chimneys, it is usually worn mortar, a cracked crown or firebrick that has come loose after decades of use. On houses from the eighties and nineties, which make up much of the town, it is more often a factory-built fireplace: a rusted chase top, a warped damper or refractory panels cracked by years of hot fires.

Stoves that run every day wear out faster

Roughly 1.4% of households in town list wood as their main source of warmth in the latest Census survey (2020 to 2024), a bit less than the Pierce County share of roughly 1.9%. In those homes, firebricks, baffles, gaskets and dampers see a full season of daily heat, and they wear out on a much shorter cycle than a fireplace lit on holidays.

It pays to fix that wear before winter. The Puget Sound Clean Air Agency's burn-ban exemption requires that wood be a home's only adequate heat and that the exemption be approved in advance; a household that depends on its stove cannot count on switching to something else if the stove fails in January.

Your chimney repair in Sumner: what's included

Every chimney repair we do in Sumner includes:

  • Firebox repair, with new firebrick or refractory panels
  • Damper repair or a new top-sealing damper
  • Resetting loose bricks and repairing the upper courses
  • Replacement of rusted chase covers on factory-built chimneys
  • Leak repairs tied to the crown, brick or flashing
  • Photos of the work and a written list of what was done

Signs you need chimney repair in Sumner

  • Cracks or gaps between the firebricks at the back of the fireplace
  • A damper that will not close, or lets in a cold draft
  • Rust stains running down a metal chase or the brick
  • Loose bricks at the top of the chimney or pieces on the roof
  • Smoke staining on the front of the fireplace surround

Smoke coming back into the room, or a smell that won't go? Book the inspection first.

Book now

Why Sumner homes need it

Two local conditions drive most of the work. The first is wet, cold weather, which lets water into small cracks and then freezes it there. The second is the 2001 Nisqually earthquake: a quake of magnitude 6.8 centered under Anderson Island, of the 30,000 homes FEMA's inspectors visited in its wake, roughly one in three had a damaged chimney. Some damage from that event was never fully repaired and only shows up when a chimney is looked at closely.

The damage that starts with a drip

Sumner's rain comes mostly between about October 10 and May 8, according to WeatherSpark, and November averages close to 8.4 inches. The Puyallup 2 W record adds the cold: roughly 69 frosty days in a typical year.

Most chimney repairs we price in town began as a small leak. Water gets into a crack, freezes and widens it, and by spring the damper has rusted, the firebox mortar has softened or a brick has come loose.

Your chimney repair in Sumner, step by step

  1. 1

    Diagnose

    A technician looks at the firebox, the flue and the outside of the chimney, and records each problem with photos.

  2. 2

    Quote

    You receive a written quote, broken down by task, so you can choose what to do now and what can wait.

  3. 3

    Repair

    The crew does the work you approved, using materials matched to the chimney type.

  4. 4

    Hand back

    We clean up, photograph the finished repair and go over it with you.

Chimney Repair prices in Sumner

What this work is quoted at for Sumner homes — the exact figure comes from the $99 on-site inspection, credited toward the work.

Chimney Repair prices in Sumner — published rates, 2026
ServicePrice in SumnerWhat that covers
Chimney RepairFrom $375Masonry repair — brick and mortar, scoped after diagnosis
Chimney Sweep$189–$449Full flue swept, Level 1 inspection included
Chimney Inspection$99 plus taxLevel 1 visual; Level 2 adds a full camera scan
Chimney ReliningFrom $1,900Full-length stainless liner, sized to the appliance
Chimney Cap Installation$265–$750Stainless cap fitted; multi-flue and custom at the top

Ranges are what these jobs are quoted at in Sumner. The exact figure is set on site after a $99 inspection (credited toward the job if you go ahead), and you approve it before any work starts.

Around Sumner

Sumner is a valley town incorporated in 1891 that calls itself the Rhubarb Pie Capital of the World, on the Puyallup River valley, with a historic core — about 12.5% of homes built in 1939 or earlier — beside newer subdivisions.

SumnerPierce County, WA · 47.203, -122.240

Before and after

What the work changes

Illustrations of what each repair changes on a typical chimney — not photos of a specific job.

The local chimney sweep crew serving Tacoma, WA

From booking to done

Four steps, each one on paper — so you always know what happens next.

  1. 1

    Book online

    Choose a genuine opening on the crew's calendar. Confirmation is immediate.

  2. 2

    On-site inspection

    Liner, crown, cap, flashing and masonry examined in order — each finding photographed.

  3. 3

    Written quote

    One document, plain numbers, covering only the work your chimney genuinely needs.

  4. 4

    Work done & documented

    The repair is completed, then handed over with before-and-after photos of every item.

Chimney Repair in Sumner — common questions

How much does chimney repair cost in Sumner?

From $375. A damper fix or a few loose bricks are near that starting point; firebox rebuilds or larger masonry work cost more, and you see the price first.

Can I start with an inspection?

Yes. The inspection is $99 plus tax. Go ahead with the repair we quote and that fee is subtracted from the total.

My chimney looks fine from the street. Could it still need repair?

Often, yes. Firebox cracks, damper wear and liner damage are all out of sight from the outside.

Get in touch

Book an inspection

Need your chimney checked in Sumner?

A $99 on-site inspection, a written quote before any work, and photos of every item we touch.

Call (253) 313-7601Book