Tacoma Chimney Pros logo

Sumner, Pierce County

Chimney Cap Installation in Sumner, WA

Putting a stainless steel cap on a Sumner chimney runs $265 to $750. One flue topped with an off-the-shelf cap sits at the low end; a wide crown with two or three flues under one custom-made cover is the high end. We measure the flue tile or pipe on the roof, fit a cap that clamps or bolts on securely, and send you a photo of it in place.

Typical investment

$265–$750

  • Serving Sumner and the rest of our Pierce County territory
  • $99 plus tax on-site inspection, credited toward an approved quote
  • Usually on the same route as Bonney Lake, Fircrest, Gig Harbor
  • Local crews
  • Licensed & insured
  • Documented work
  • Written quote first

Book an inspection

Book your $99 inspection

$99 plus tax, deducted when you approve the repair

Service
Town

Book your $99 inspection

Pick a real open slot on our crew's calendar — takes about a minute.

  • No payment to book
  • Written on-site quote
  • Photos of every job
  1. 1
  2. 2
  3. 3
  4. 4

Chimney Cap Installation in Sumner

Pick a date
October 2026
Su
Mo
Tu
We
Th
Fr
Sa
Open times

Loading open times…

Not sure where to start

What's going on with your chimney?

Pick what you're seeing at your Sumner home — we'll point you to the right fix.

What we do

Other chimney services in Sumner

The same crew, the same written quote — for Sumner homes.

Ranges shown for orientation — the exact figure is written up on-site, after the inspection.

Why Sumner homes need chimney cap installation

Many older Sumner chimneys were built long before caps were common, and some of the pre-war stacks around the historic downtown still have bare tile sticking out of the crown. Newer homes from the eighties and nineties tend to have factory-built chimneys with a metal chase top, where the cap is part of a manufacturer's system and has to match it. Both types show up often, because the town mixes the two: about a quarter of its homes predate 1960, yet the median was built in 1989.

Your chimney cap installation in Sumner: what's included

Every chimney cap installation we do in Sumner includes:

  • Measurement of every flue on the chimney before ordering
  • Stainless steel cap with a screen, sized to the tile or the metal pipe
  • Multi-flue caps that cover the full crown where needed
  • Secure fastening, by clamp, bolts or a crown mount
  • Removal of any nesting material found at the top of the flue
  • Photo of the finished cap, taken from the roof

Signs you need chimney cap installation in Sumner

  • You can see bare flue tile or open pipe from the street
  • Water drips or pools in the firebox after a storm
  • Chirping, scratching or twigs falling onto the damper
  • An old cap that is rusted, dented or leaning
  • Mesh clogged with soot, which chokes the draft

Smoke coming back into the room, or a smell that won't go? Book the inspection first.

Book now

Why Sumner homes need it

An open flue in Sumner catches a lot of water. Rain runs down the tile, soaks the smoke chamber and mixes with soot, which is what gives many fireplaces a sour smell in winter. Birds and small animals also look for a dry, warm spot in the fall. A cap with a mesh screen deals with both, and it stops sparks from landing on a mossy roof.

The rain an open flue collects

According to WeatherSpark's model for Sumner, November is the rainiest month, with about 8.4 inches of rain on average, compared with roughly 0.7 inches in July. The breezy part of the year, from about October 18 to April 15, overlaps almost exactly with the wettest one, and December has the strongest average wind, near 5.2 mph.

Over the long run, the Puyallup 2 W station a short drive west logged 39.84 inches of yearly precipitation on average. Rain that comes in at an angle during a windy storm finds its way into any flue left open, which is why the cap is often the cheapest fix on the whole chimney.

Your chimney cap installation in Sumner, step by step

  1. 1

    Measure up top

    We check the size and height of each flue and the condition of the crown, because a cap needs a sound base to hold on.

  2. 2

    Choose the cap

    You get a written price for a stock cap or, on a multi-flue stack, a custom one, with the difference explained.

  3. 3

    Fit and fasten

    The cap goes on and is secured so a winter gust cannot shift it, with the screen set clear of the flue opening.

  4. 4

    Show the result

    You get a photo of the finished cap, plus a note on the crown if it needs attention soon.

Chimney Cap Installation prices in Sumner

What this work is quoted at for Sumner homes — the exact figure comes from the $99 on-site inspection, credited toward the work.

Chimney Cap Installation prices in Sumner — published rates, 2026
ServicePrice in SumnerWhat that covers
Chimney Cap Installation$265–$750Stainless cap fitted; multi-flue and custom at the top
Chimney Sweep$189–$449Full flue swept, Level 1 inspection included
Chimney Inspection$99 plus taxLevel 1 visual; Level 2 adds a full camera scan
Chimney ReliningFrom $1,900Full-length stainless liner, sized to the appliance
Chimney RepairFrom $375Masonry repair — brick and mortar, scoped after diagnosis

Ranges are what these jobs are quoted at in Sumner. The exact figure is set on site after a $99 inspection (credited toward the job if you go ahead), and you approve it before any work starts.

Around Sumner

Sumner is a valley town incorporated in 1891 that calls itself the Rhubarb Pie Capital of the World, on the Puyallup River valley, with a historic core — about 12.5% of homes built in 1939 or earlier — beside newer subdivisions.

SumnerPierce County, WA · 47.203, -122.240

Before and after

What the work changes

Illustrations of what each repair changes on a typical chimney — not photos of a specific job.

The local chimney sweep crew serving Tacoma, WA

From booking to done

Four steps, each one on paper — so you always know what happens next.

  1. 1

    Book online

    Choose a genuine opening on the crew's calendar. Confirmation is immediate.

  2. 2

    On-site inspection

    Liner, crown, cap, flashing and masonry examined in order — each finding photographed.

  3. 3

    Written quote

    One document, plain numbers, covering only the work your chimney genuinely needs.

  4. 4

    Work done & documented

    The repair is completed, then handed over with before-and-after photos of every item.

Chimney Cap Installation in Sumner — common questions

What will a new cap cost on a Sumner chimney?

Between $265 and $750, installed. Standard single-flue caps are at the lower end; custom stainless covers for crowns with several flues are at the top.

Does Washington's code say anything about the spark screen?

Yes. For a spark arrestor, the state residential code fixes the mesh: holes that block a sphere bigger than 1/2 inch yet let a 3/8-inch sphere through. The screen must also lift off, so it can be cleaned.

Can a cap fix a crumbling crown?

No. A cap sits on the crown, so a crown that is cracked or breaking up should be repaired first. We tell you before ordering.

Get in touch

Book an inspection

Need your chimney checked in Sumner?

A $99 on-site inspection, a written quote before any work, and photos of every item we touch.

Call (253) 313-7601Book