Tacoma Chimney Pros logo

Fife, Pierce County

Chimney Repair in Fife, WA

Chimney repair in Fife starts at $375 for a small, contained fix, and the quote grows with the size of the problem, not with guesswork. Before we touch a trowel you get photos of what is wrong and a written price for putting it right. Nothing is added on the day without your say.

Typical investment

From $375

  • Serving Fife and the rest of our Pierce County territory
  • $99 plus tax on-site inspection, credited toward an approved quote
  • Usually on the same route as Bonney Lake, Fircrest, Gig Harbor
  • Local crews
  • Licensed & insured
  • Documented work
  • Written quote first

Book an inspection

Book your $99 inspection

$99 plus tax, deducted when you approve the repair

Service
Town

Book your $99 inspection

Pick a real open slot on our crew's calendar — takes about a minute.

  • No payment to book
  • Written on-site quote
  • Photos of every job
  1. 1
  2. 2
  3. 3
  4. 4

Chimney Repair in Fife

Pick a date
October 2026
Su
Mo
Tu
We
Th
Fr
Sa
Open times

Loading open times…

Not sure where to start

What's going on with your chimney?

Pick what you're seeing at your Fife home — we'll point you to the right fix.

What we do

Other chimney services in Fife

The same crew, the same written quote — for Fife homes.

Ranges shown for orientation — the exact figure is written up on-site, after the inspection.

Why Fife homes need chimney repair

Fife's chimneys split into two families. A minority are masonry, mostly on the older farm-era and mid-century houses; census data put about one home in ten here before 1960. The rest are framed chases wrapped in siding, with a metal flue inside and a sheet-metal top, the usual build on newer homes, which is most of Fife. Brick needs mortar and crown work. A chase needs its top pan, seams and siding kept tight. We repair both and quote them differently.

A heating chimney cannot wait for spring

Wood is the chief heat source in approximately 1.2% of occupied homes in Fife, compared with about 1.9% countywide, in five-year Census estimates for 2020 to 2024.

In those homes a damaged chimney is not an item for next summer, because the fire keeps going all winter. If the damage is tied to an old stove, a repair visit is also a good time to weigh swapping it: the regional clean air agency pays $500 to Pierce County owners who deliver a still-working old stove or insert for recycling.

What the county went through over wood smoke

In 2012, Washington Ecology notes, the Tacoma-Pierce County area stood alone in the state as the one place still failing the federal fine particle standard. The EPA had placed it on that list three years earlier.

Getting off the list, in March 2015, took stricter stove rules and firmer burn ban enforcement, and the area now lives under a maintenance plan meant to keep it clean. For a Fife homeowner that is the practical backdrop to a repair: a well-drafting chimney and a clean-burning stove are part of how the county holds on to that result.

Your chimney repair in Fife: what's included

Every chimney repair we do in Fife includes:

  • Photos and written scope before work
  • Brick replacement and mortar repair
  • Crown patching or recasting
  • Chase top and cover repair
  • Siding and trim resealed at the chase
  • Cleanup and after-photos

Signs you need chimney repair in Fife

  • Rust streaks running down the siding
  • Loose or missing bricks near the top
  • A water ring on the ceiling by the chimney
  • Mortar you can scratch out with a key
  • A chimney that looks like it is leaning

Smoke coming back into the room, or a smell that won't go? Book the inspection first.

Book now

Why Fife homes need it

What breaks here is rarely dramatic. A chase top that has rusted through lets rain run down the inside of the framing; a cracked crown lets it soak the brick below. Either one can go unnoticed for a season or two in a place where rain arrives most weeks from fall to spring. By the time a stain shows on the ceiling, the wood or mortar has usually been wet for a while.

Months of rain on a chimney top

Fife's rainy half of the year is a long one: WeatherSpark marks it from about October 9 through May 2, with November the peak at roughly 8 inches.

That is why most repairs we quote here start at the top. Beyond fixing what is broken, we check the stack against Washington's height rule: masonry must rise three feet or more above the roof it passes through and top anything within ten feet by two feet. A stack rebuilt shorter than that is a stack that will draft poorly.

Your chimney repair in Fife, step by step

  1. 1

    Find the cause

    We trace water or damage back to its source, since a stain inside often starts several feet away on the roof.

  2. 2

    Price it in writing

    You get a scope, photos and a fixed quote. The work waits until you have read it and agreed.

  3. 3

    Fix and match

    Brick, mortar or chase materials are chosen to match what is there, so the repair does not stand out from the street.

  4. 4

    Close out

    The site is cleaned, and you get photos of the finished repair for your records or your insurer.

Chimney Repair prices in Fife

What this work is quoted at for Fife homes — the exact figure comes from the $99 on-site inspection, credited toward the work.

Chimney Repair prices in Fife — published rates, 2026
ServicePrice in FifeWhat that covers
Chimney RepairFrom $375Masonry repair — brick and mortar, scoped after diagnosis
Chimney Sweep$189–$449Full flue swept, Level 1 inspection included
Chimney Inspection$99 plus taxLevel 1 visual; Level 2 adds a full camera scan
Chimney ReliningFrom $1,900Full-length stainless liner, sized to the appliance
Chimney Cap Installation$265–$750Stainless cap fitted; multi-flue and custom at the top

Ranges are what these jobs are quoted at in Fife. The exact figure is set on site after a $99 inspection (credited toward the job if you go ahead), and you approve it before any work starts.

Around Fife

Fife is a city incorporated in 1957 on farmland just south of the Port of Tacoma, along I-5, with mostly newer homes — a median build year of 2000, about 22% built before 1980.

FifePierce County, WA · 47.239, -122.357

Before and after

What the work changes

Illustrations of what each repair changes on a typical chimney — not photos of a specific job.

The local chimney sweep crew serving Tacoma, WA

From booking to done

Four steps, each one on paper — so you always know what happens next.

  1. 1

    Book online

    Choose a genuine opening on the crew's calendar. Confirmation is immediate.

  2. 2

    On-site inspection

    Liner, crown, cap, flashing and masonry examined in order — each finding photographed.

  3. 3

    Written quote

    One document, plain numbers, covering only the work your chimney genuinely needs.

  4. 4

    Work done & documented

    The repair is completed, then handed over with before-and-after photos of every item.

Chimney Repair in Fife — common questions

How much does chimney repair cost in Fife, WA?

It starts at $375 for a small, contained job such as a few bricks or a local patch. Larger work, like rebuilding a section above the roof, is quoted after we have seen it.

My chimney is a wood-framed chase with siding. Do you repair those?

Yes. Many Fife homes have one. The usual repairs are a new or resealed chase top, tightened siding seams and flashing where the chase meets the roof.

Should I have it inspected before a repair?

If the cause is unclear, yes. The inspection is $99 plus tax, and if you approve the repair quote we take that amount off it.

Get in touch

Book an inspection

Need your chimney checked in Fife?

A $99 on-site inspection, a written quote before any work, and photos of every item we touch.

Call (253) 313-7601Book