Tacoma Chimney Pros logo

Puyallup, Pierce County

Chimney Waterproofing in Puyallup, WA

Chimney waterproofing in Puyallup costs $320 to $795; the price moves with the size of the stack and the number of faces exposed above the roof. The treatment is a breathable water repellent: it keeps rain from soaking into brick and mortar while still letting moisture inside the masonry escape as vapor. It is applied only after the brick is clean and any open joints or cracks have been repaired, because a sealer cannot bridge a gap.

Typical investment

$320–$795

  • Serving Puyallup and the rest of our Pierce County territory
  • $99 plus tax on-site inspection, credited toward an approved quote
  • Usually on the same route as Bonney Lake, Fircrest, Gig Harbor
  • Local crews
  • Licensed & insured
  • Documented work
  • Written quote first

Book an inspection

Book your $99 inspection

$99 plus tax, deducted when you approve the repair

Service
Town

Book your $99 inspection

Pick a real open slot on our crew's calendar — takes about a minute.

  • No payment to book
  • Written on-site quote
  • Photos of every job
  1. 1
  2. 2
  3. 3
  4. 4

Chimney Waterproofing in Puyallup

Pick a date
October 2026
Su
Mo
Tu
We
Th
Fr
Sa
Open times

Loading open times…

Not sure where to start

What's going on with your chimney?

Pick what you're seeing at your Puyallup home — we'll point you to the right fix.

What we do

Other chimney services in Puyallup

The same crew, the same written quote — for Puyallup homes.

Ranges shown for orientation — the exact figure is written up on-site, after the inspection.

Why Puyallup homes need chimney waterproofing

Puyallup chimneys spend a long part of the year wet. On older homes near the valley floor, the brick is often original and has never been treated; on some newer homes, a masonry veneer wraps the chase and absorbs water the same way. In both cases the telltale signs are similar: dark patches that stay damp long after the rain stops, white salt deposits, and flaking faces on the lower courses.

Your chimney waterproofing in Puyallup: what's included

Every chimney waterproofing we do in Puyallup includes:

  • Moisture check of every exposed face
  • Brick cleaned of moss, soot and loose material
  • Small cracks and open joints repaired first
  • Breathable repellent applied to saturation
  • Crown checked and sealed if needed
  • Photos before and after treatment

Signs you need chimney waterproofing in Puyallup

  • Brick that looks wet long after the rain stops
  • White, powdery deposits on the chimney face
  • Brick faces flaking or popping off
  • A damp, musty smell near the fireplace
  • Water stains on the ceiling next to the stack

Smoke coming back into the room, or a smell that won't go? Book the inspection first.

Book now

Why Puyallup homes need it

The mistake to avoid is a glossy, film-forming sealer. It traps moisture behind it, and when that moisture freezes, the face of the brick can pop off in sheets. We use vapor-permeable repellents made for masonry, and we tell you honestly when the brick needs repair first, or when the leak is really at the flashing and waterproofing will not solve it.

A wet, freezing season for untreated brick

Records from the Puyallup experiment station put average yearly precipitation at 39.84 inches, with December the wettest month at 6.16 inches. That wet stretch overlaps with the coldest part of the year, when the station logged a freezing low on about 69 nights annually.

Drying time is short, too: WeatherSpark finds the sky overcast or mostly cloudy about 75% of the time in December, in a cloudier stretch of the year lasting roughly 8.3 months. Untreated brick soaks up rain like a sponge, and in the valley it often freezes before it dries. A breathable repellent cuts how much water the brick takes on in the first place, so there is far less left inside to freeze.

Your chimney waterproofing in Puyallup, step by step

  1. 1

    Check where water enters

    We look at the crown, cap, flashing and brick to confirm the masonry itself is taking on water.

  2. 2

    Clean and repair

    The surface is cleaned, and cracks or failed joints are repaired so the treatment has a sound base.

  3. 3

    Apply the repellent

    A vapor-permeable repellent is applied in dry weather until the brick is fully saturated.

  4. 4

    Confirm the result

    Photos of the finished chimney, and a note on when the treatment should be renewed.

Chimney Waterproofing prices in Puyallup

What this work is quoted at for Puyallup homes — the exact figure comes from the $99 on-site inspection, credited toward the work.

Chimney Waterproofing prices in Puyallup — published rates, 2026
ServicePrice in PuyallupWhat that covers
Chimney Waterproofing$320–$795Breathable sealer — reapplied every 3–5 years in this climate
Chimney Sweep$189–$449Full flue swept, Level 1 inspection included
Chimney Inspection$99 plus taxLevel 1 visual; Level 2 adds a full camera scan
Chimney ReliningFrom $1,900Full-length stainless liner, sized to the appliance
Chimney RepairFrom $375Masonry repair — brick and mortar, scoped after diagnosis

Ranges are what these jobs are quoted at in Puyallup. The exact figure is set on site after a $99 inspection (credited toward the job if you go ahead), and you approve it before any work starts.

Around Puyallup

Puyallup is a valley city platted by Ezra Meeker in 1877, at the heart of what was a leading hop-growing region, on the Puyallup River valley, with homes with a median build year of 1987, about 39% of them built before 1980.

PuyallupPierce County, WA · 47.185, -122.293

Before and after

What the work changes

Illustrations of what each repair changes on a typical chimney — not photos of a specific job.

The local chimney sweep crew serving Tacoma, WA

From booking to done

Four steps, each one on paper — so you always know what happens next.

  1. 1

    Book online

    Choose a genuine opening on the crew's calendar. Confirmation is immediate.

  2. 2

    On-site inspection

    Liner, crown, cap, flashing and masonry examined in order — each finding photographed.

  3. 3

    Written quote

    One document, plain numbers, covering only the work your chimney genuinely needs.

  4. 4

    Work done & documented

    The repair is completed, then handed over with before-and-after photos of every item.

Chimney Waterproofing in Puyallup — common questions

How much does chimney waterproofing cost in Puyallup?

$320 to $795. A small single-flue chimney is at the low end; a tall or wide stack with several exposed faces is at the top.

How long does chimney sealing last?

Usually three to five years in this climate, after which a fresh coat renews the protection.

Can waterproofing stop a roof leak around my chimney?

Only when the brick itself is letting the water in. Leaks at the roofline are more often a flashing problem, which we check first.

Get in touch

Book an inspection

Need your chimney checked in Puyallup?

A $99 on-site inspection, a written quote before any work, and photos of every item we touch.

Call (253) 313-7601Book